Starlink Standard Kit: Specs, What’s in the Box, and Renting vs Buying (2026)
Short answer
The Starlink Standard kit is Starlink’s full-size residential dish (about 23.4 x 15.1 in, 6.4 lb) with a kickstand, a 15 m (49 ft) cable, a power supply and a separate router. On the Standard 4 X version, Router 3 provides Wi-Fi 6 coverage of up to 3,200 sq ft and up to 235 devices. The dish draws 75–100 W on average and melts snow at up to 1.5 in per hour. It’s the better choice over the Mini for crowds, events and fixed sites. Star Surf rents Standard kits from $20/day, so you don’t need to buy one for a short project.
Key takeaways
- In the box: dish, kickstand, 15 m Starlink cable, power supply, AC cable and router (per Starlink’s Standard 4 X spec sheet).
- Dish: 594 x 383 x 39.7 mm (23.4 x 15.07 x 1.5 in), 2.9 kg (6.4 lb) bare, IP67, 110-degree field of view.
- Router 3: Wi-Fi 6 tri-band, up to 3,200 sq ft, up to 235 devices, two Ethernet ports, and support for up to 3 Starlink mesh nodes.
- Power: 75–100 W average, from a normal outlet. The Mini uses much less, which is why it suits batteries better.
- Price: Starlink’s US hardware price changes often; LeoSat Network reported $349 in early November 2026. Renting avoids the purchase for short needs.
What is the Starlink Standard kit?
The Standard kit is Starlink’s main full-size dish, designed for homes and fixed locations but also widely used at events and job sites. Unlike the Mini, which has its router built in, the Standard uses a separate router, so you can place the dish where it sees the sky and the router where your devices are.
Starlink’s current spec sheet calls it the Standard 4 X when it comes with Router 3. LeoSat Network also lists a Standard 4 version that ships with the smaller Router Mini; the dish is the same. Older reviews may call it the Gen 3 Standard.
What comes in the Starlink Standard kit box?
According to Starlink’s Standard 4 X specification sheet, the box contains:
- The Standard dish
- A Standard kickstand
- A 15 m (49.2 ft) Starlink cable from dish to router
- A power supply and AC power cable
- Router 3 (Wi-Fi 6)
The packed box measures about 652 x 452 x 98 mm and weighs 6.73 kg (14.83 lb), which matters if you’re shipping it or carrying it to a site. Every Star Surf rental kit arrives in a protective hard case, and our setup guide walks through connecting it.
What are the Starlink Standard kit specs?
| Spec | Starlink Standard (4 X) |
|---|---|
| Dish size | 594 x 383 x 39.7 mm (23.4 x 15.07 x 1.5 in) |
| Dish weight | 2.9 kg (6.4 lb); 3.2 kg (7 lb) with kickstand |
| Field of view | 110 degrees |
| Weather rating | IP67 Type 4 |
| Operating temperature | -30 to 50 C (-22 to 122 F) |
| Snow melt | Up to 40 mm (1.5 in) per hour |
| Wind (operational) | 96 km/h (60 mph+) |
| Average power use | 75–100 W |
| Router | Router 3: Wi-Fi 6, tri-band, 4×4 MU-MIMO |
| Wi-Fi coverage | Up to 3,200 sq ft (297 m²) |
| Connected devices | Up to 235 |
| Ethernet | Two LAN ports on Router 3 |
Source: Starlink’s official Standard 4 X specification sheet. Real-world speeds depend on location, network load and your plan; Starlink doesn’t list a fixed speed for the dish. For router tips, see our Starlink router guide.
Starlink Standard kit vs Mini: which one do you need?
| Standard kit | Starlink Mini | |
|---|---|---|
| Dish size | 23.4 x 15.07 in | About 11.75 x 10.2 in |
| Weight | 6.4 lb (dish only) | About 2.4 lb |
| Router | Separate Wi-Fi 6 router (Router 3) | Built-in Wi-Fi 5 |
| Wi-Fi coverage | Up to 3,200 sq ft | Up to about 1,200 sq ft |
| Average power | 75–100 W (AC outlet) | About 25–40 W (DC or USB-C PD) |
| Ethernet | Two ports (Router 3) | Adapter needed |
| Snow melt | Up to 40 mm/h | Up to 25 mm/h |
| Best for | Events, crowds, offices, job sites, winter | Travel, camping, hunting, 1–5 users |
Pick the Standard when you have many users or devices, a building or tent to cover, wired gear such as a livestream encoder or POS hub, or winter weather. Pick the Mini when you need to carry it, run it on a battery, or connect a few devices. Mini figures come from LeoSat Network and launch coverage of the Mini 2; for the Mini’s device limit, see how many devices can connect to Starlink Mini.
How much does a Starlink Standard kit cost, and when is renting better?
Starlink’s hardware prices change frequently and vary by region and promotion. LeoSat Network, reading Starlink’s offer data on November 2, 2026, reported the Standard at $349 in the US; US Mobile listed it at $499 plus shipping in March 2026. Check starlink.com for today’s price. You’ll also need a monthly service plan.
| Situation | Better choice |
|---|---|
| Permanent home or office with no cable or fiber | Buy a kit and plan |
| Wedding, festival, tournament or trade show | Rent a Standard (or several) |
| Job site for a few weeks or months | Rent, then return it |
| Testing Starlink at a new property | Rent first |
| Holiday visit to a cabin or family home | Rent |
Star Surf rents Standard and Mini kits for $20/day (2-day minimum, or $50 for a single day) or $150/week from 7 days, with multi-week discounts from 2 weeks and custom quotes for a month or longer. Round-trip shipping in the lower 48 is typically $100 for a Standard kit, or pick it up free in American Fork, Utah. A $350 refundable deposit applies, and you don’t need a Starlink account. For bigger setups, see our event Wi-Fi and multi-kit enterprise pages.
Our recommendation
If you need Starlink at one permanent address, buying a Standard kit and a plan is the long-term answer. If you need strong Wi-Fi for an event, a job site, a busy season or a test run, rent the Standard kit instead. Star Surf ships Standard kits across the US in a hard case (or you can pick up free in American Fork, Utah), from $20/day or $150/week with unlimited data.
Reserve a Starlink kitAsk us a questionFAQs
What comes in a Starlink Standard kit?
The Standard 4 X kit includes the dish, a kickstand, a 15 m (49.2 ft) Starlink cable, a power supply, an AC power cable and Router 3, according to Starlink’s specification sheet.
How big is the Starlink Standard dish?
The dish measures 594 x 383 x 39.7 mm (23.4 x 15.07 x 1.5 in) and weighs 2.9 kg (6.4 lb), or 3.2 kg (7 lb) with the kickstand.
How much power does the Starlink Standard kit use?
Starlink lists average power consumption of 75–100 W for the Standard kit. It runs from a normal wall outlet or a generator or power station with enough capacity.
Is the Starlink Standard better than the Mini?
For crowds, larger spaces, wired equipment and snow, yes: Router 3 covers up to 3,200 sq ft and up to 235 devices. The Mini is better for portability and battery power.
Can I rent a Starlink Standard kit?
Yes. Star Surf rents Starlink Standard kits from $20/day (2-day minimum, or $50 for a single day) or $150/week with unlimited data, with free pick-up in American Fork, Utah, or shipping anywhere in the US.
Need Starlink for a few days or a few weeks?
Rent from $20/day. Pick up in American Fork, UT, or have it shipped anywhere in the US in a protective hard case.
Check availabilityMulti-kit & event quotesAbout Star Surf
Star Surf is a Starlink rental company based in American Fork, Utah. We rent Starlink Mini and Standard kits from $20/day (2-day minimum) or $150/week with unlimited data, for pick-up in Utah or shipping anywhere in the US, and supply multi-kit setups for events, job sites and businesses. Check availability.
More guides
Sources
- Starlink: Standard 4 X kit specification sheet
- LeoSat Network: Starlink kits compared (Nov 2, 2026)
- US Mobile: Starlink Mini vs Standard (updated June 2026)
- Starlink Info: How big is a Starlink dish? (Aug 2026)
Prices, plans and speeds are as reported in our sources (checked November 2026) and change often; check starlink.com before you buy. Starlink® is a trademark of SpaceX. Star Surf is an independent rental company and is not affiliated with Starlink or SpaceX.