Starlink Snow Melt: How It Works, Which Setting to Use and How to Keep Snow Off Your Dish (Winter 2026)
Short answer
Starlink snow melt is a built-in feature that warms the dish to melt snow and ice so it keeps its view of the sky. You control it in the Starlink app under Settings, Starlink, Snow Melt: Automatic (the default and the setting most sources recommend) warms the dish only when snow or ice is affecting the signal, Pre-heat keeps it warm ahead of a storm and uses more power, and Off turns melting off. Every Starlink dish can melt snow, but at different speeds: BGR reports about 1 inch per hour for the Mini and up to 3.5 inches per hour for the Performance (Gen 3) dish. Mounting matters just as much, because a dish under drifting roof snow can still get buried. Heading somewhere snowy this winter? Star Surf rents Starlink kits with unlimited data by the day or week.
Key takeaways
- Where to find it: Starlink app, Settings, Starlink tab, Snow Melt.
- Automatic is the default: it adds heat only when snow or ice is hurting the signal, and saves power the rest of the time.
- Pre-heat costs power: it keeps the dish warm before a storm; one Reddit user quoted by BGR saw about 110 W on Pre-heat versus about 35 W on Automatic (anecdotal).
- Melt speed varies by dish: about 1 inch per hour for the Mini, 1.5 for V4 and Enterprise, up to 3.5 for Performance Gen 3 (BGR, Nov 2026).
- Sleep schedules turn heating off: if you use one, the dish won’t melt snow while it sleeps (SatelliteInternet).
What is Starlink snow melt?
Snow melt is Starlink’s way of keeping snow and ice from blocking the dish. There is no separate heater: the dish raises its power, and the extra heat warms the surface so snow slides off or melts. Dishytech explains that it’s a by-product of the antenna’s own electronics, which is why you may sometimes see a “Heating” message in the app even when it isn’t snowing. That’s normal.
Snow melt only clears snow that lands on the dish. It can’t help if the dish is buried by a drift or snow sliding off a roof, so placement still matters (see below).
Which Starlink snow melt setting should you use?
| Setting | What it does | Best for |
|---|---|---|
| Automatic (default) | Adds heat only when snow, ice or heavy rain is lowering the signal; saves power the rest of the time | Most homes, cabins and job sites |
| Pre-heat | Keeps the dish warm continuously, before snow arrives | A known heavy storm, when power use isn’t a concern |
| Off | No extra power for snow; the most power-efficient option | Battery or solar setups in places where it won’t snow |
Dishytech, SlashGear and BGR all describe the same three options, and BGR recommends Automatic for most people because Pre-heat can raise your power use. To change it, open the Starlink app and go to Settings, then the Starlink tab, then Snow Melt.
How fast does a Starlink dish melt snow?
It depends on the dish. BGR’s November 2026 roundup lists these melt rates:
| Starlink dish | Reported snow melt rate |
|---|---|
| Performance (Gen 3) | 3.5 inches per hour |
| Performance (Gen 2) | 3 inches per hour |
| V5 | Up to 1.6 inches per hour |
| V4 and Enterprise | 1.5 inches per hour |
| Mini | About 1 inch per hour |
Dishytech notes that every Starlink model can melt snow, but the Mini is likely to struggle in heavy snow. In a big storm, expect to clear a Mini by hand now and then. SatelliteInternet lists an operating range of -22°F to 122°F.
Does snow melt use a lot of power?
Starlink doesn’t publish an exact figure for heating, so treat the numbers you see online as rough. SlashGear cites a Reddit screenshot showing roughly 40–50 W more while heating, and BGR quotes a user whose dish drew around 110 W on Pre-heat and around 35 W after switching to Automatic.
On grid power that’s a small cost. On a battery or power station it matters a lot: leave the setting on Automatic, and size your battery for winter. Our power station guide for the Starlink Mini covers runtime.
How do you keep snow off a Starlink dish?
- Mount it where snow can’t pile up: SatelliteInternet advises against mounting directly on a roof where heavy snow is expected; a pole beside the building, or a spot under an overhang with a clear view of the sky, works better.
- Don’t cover it: covers and plastic bags interfere with the signal.
- Don’t spray it: skip WD-40, cooking spray and silicone sprays, which can damage the dish or block the signal.
- Clear it gently: use a long soft broom from the ground; for ice, pour warm (not boiling) water rather than scraping.
- Turn off the sleep schedule in winter: the dish won’t melt snow while it’s asleep.
- Keep the area under an actuated dish clear: Dishytech warns that snow piled underneath can cause a “motors stuck” error.
Snow falling through the air rarely stops Starlink by itself; heavy wet snow can slow speeds briefly. Our Starlink in bad weather guide covers rain, wind and storms.
Our recommendation
Leave Snow Melt on Automatic, turn off any sleep schedule for the winter, and mount the dish on a pole or under an overhang where roof snow can’t bury it. If you need internet at a snowy cabin, camp or job site for a few days or weeks, rent a Starlink kit from Star Surf for $20/day (2-day minimum, or $50 for a single day) or $150/week, with unlimited data.
Reserve a Starlink kitAsk us a questionNeed Starlink somewhere snowy this winter?
Ski cabins, hunting camps, winter job sites and holiday rentals in the mountains often have weak internet. A rented kit gets you online without buying a dish or signing up for a plan.
Star Surf rents Starlink Mini and Standard kits with unlimited data and no Starlink account needed; the Wi-Fi network is named StarSurf followed by three digits. For heavy snow, the Standard kit melts snow faster than the Mini. Pick up free in American Fork, Utah, or get round-trip shipping anywhere in the lower 48. See the Starlink Standard kit guide or the Starlink Mini rental guide to choose.
FAQs
Does Starlink melt snow automatically?
Yes. Snow Melt is set to Automatic by default, so the dish warms itself when snow or ice is affecting the signal. You can change it in the Starlink app under Settings, Starlink, Snow Melt.
Should I use Pre-heat or Automatic on Starlink?
Most sources recommend Automatic. Pre-heat keeps the dish warm before a storm but uses more power, which matters most on battery or solar.
Does the Starlink Mini have snow melt?
Yes, every Starlink dish can melt snow, but the Mini is the slowest, at about 1 inch per hour according to BGR, so it may need clearing by hand in heavy snow.
Can I put a cover over my Starlink dish in winter?
No. Covers and plastic bags interfere with the signal. Mount the dish where snow can’t pile up and clear it gently with a soft broom if needed.
Can I rent a Starlink kit for a winter cabin or ski trip?
Yes. Star Surf rents Starlink Mini and Standard kits from $20/day (2-day minimum) or $150/week with unlimited data, with free pick-up in American Fork, Utah, or round-trip shipping in the lower 48.
Need Starlink for a few days or a few weeks?
Rent from $20/day. Pick up in American Fork, UT, or have it shipped anywhere in the US in a protective hard case.
Check availabilityMulti-kit & event quotesAbout Star Surf
Star Surf is a Starlink rental company based in American Fork, Utah. We rent Starlink Mini and Standard kits from $20/day (2-day minimum) or $150/week with unlimited data, for pick-up in Utah or shipping anywhere in the US, and supply multi-kit setups for events, job sites and businesses. Check availability.
More guides
Sources
- BGR: Starlink has a clever solution for harsh winters (Nov 1, 2026)
- Dishytech: Starlink snow melt settings explained (updated Aug 4, 2025)
- SatelliteInternet.com: How to keep snow off your Starlink and other satellite dishes (Sep 18, 2025)
- SlashGear: What does ‘Heating’ mean on Starlink? (Dec 18, 2024)
Prices, plans and speeds are as reported in our sources (checked November 2026) and change often; check starlink.com before you buy. Starlink® is a trademark of SpaceX. Star Surf is an independent rental company and is not affiliated with Starlink or SpaceX.